Burner clicking but not lighting?
Stove Repair in Mount Horeb, WI
A stovetop with one dead burner slows dinner down, but a burner that clicks nonstop or a coil that will not shut off needs attention right away. Call +1-855-394-3377 and the dispatch line connects you with an independent stove repair pro in Mount Horeb who carries igniters, spark modules, infinite switches and receptacles.
- Burners that will not light, will not heat, or will not turn off
- You get the price after diagnosis and before any part is replaced
- Gas, electric coil, smoothtop and induction cooktops and ranges
Why Choose Our Specialized Stove Repair in Mount Horeb, WI
A clicking igniter and a gas valve problem can look similar to a homeowner, but they are very different repairs. That is why these calls go to independent pros who work on cooktops all the time.
Licensed and insured independent pros
Stove calls are routed to independent contractors with their own insurance, licensed where WI requires it for appliance and gas work. Anyone touching a gas valve or orifice should leak test every connection afterward, and you can ask to see it done.
A clear quote first
The independent pro finds the failed igniter, switch, element or board and quotes the repair before replacing it. On a cracked glass top, you also get the price of the new top so you can weigh it against a new range.
Local dispatch with safety in mind
The dispatcher asks a couple of safety questions, then looks for the earliest open slot with an independent cooktop pro in Mount Horeb. Same-day slots are common, depending on contractor availability.
Burner and gas tools
Cooktop diagnosis needs a multimeter, a manometer to check gas pressure at the regulator, spare orifices for LP conversion, and a combustible gas detector. The independent pros on this line come with that equipment.
- Smell gas? Leave the house and call the gas utility from outside
- Turn off the breaker if an electric burner will not shut off
- Note which burners fail and whether the others still work
Common Stove Repair Calls Across Mount Horeb Kitchens
Whether the cooktop is gas, coil, glass or induction, the fault is usually in the heat source, its control, or the wiring between them. These are the most common calls that come through dispatch.
Burner clicks but will not light
A burner that clicks without lighting often has a wet or cracked spark igniter, a burner cap sitting crooked, or ports clogged with boiled-over food. The tech checks the cap seating, clears the ports, inspects the igniter porcelain for cracks, and confirms gas is reaching the burner.
Clicking that never stops
Constant clicking across all burners points to a wet or shorted burner switch at the valve, or a failing spark module. Drying time can clear it, but if the clicking returns, the tech tests each switch and the spark module to find the one that is shorted.
Weak, uneven or yellow flames
A healthy natural gas flame is blue with a small, defined inner cone. Tall yellow tips, soot on pans or a lazy, lifting flame means the air and gas mix is off. The pro checks the air shutter where fitted, cleans or sizes the orifice, and confirms the range was properly converted if the home runs on LP gas.
Coil burner not heating or stuck on high
When a coil burner does nothing, swap it with a working burner of the same size. If the coil heats in the other spot, the problem is the receptacle or the infinite switch, not the coil. A scorched terminal block under the burner is a frequent cause, along with a worn infinite switch that no longer cycles. If the burner glows red on every setting, the infinite switch has welded contacts and needs to go.
Radiant elements and cracked glass
A smoothtop zone that will not glow usually has a burned-out radiant element or a failed limiter under the glass. Any crack in the glass means the cooktop should stay off until the top is replaced, since liquid can reach the wiring below. A hot-surface indicator light that never goes out or never comes on usually traces to a limiter or a relay on the control board.
Induction zones and cookware errors
If an induction zone blinks and shuts off, first check the cookware with a magnet, since non-magnetic pans are not detected. When the cookware is fine, the tech looks at the power board, the induction coil connections and the cooling fan, which shuts the cooktop down if it overheats. Loose or broken knobs and stiff gas valves on any cooktop get checked on the same visit.
Burner dead or clicking nonstop? Call for a local cooktop pro.
Have the model number ready, often under the cooktop lip or behind the drawer. The call connects you with an available independent cooktop specialist in Mount Horeb.
From Dead Burner to Full Flame in Four Steps
It all starts with a phone call, not a form.
Call dispatch
Call +1-855-394-3377, say what type of cooktop you have, and describe the problem burner by burner. The dispatcher connects you with an available independent pro.
Rapid mobile arrival
A local independent pro comes with the parts behind most cooktop calls already on the truck.
Expert assessment and quote
The pro tests the igniter, switch, element or board, explains the fault, and quotes the repair before replacing parts.
Repair, test and confirm
After the repair, the tech lights or heats every burner on every setting and leak tests any gas connection that was opened. Ask about the contractor's own parts and labor warranty.
Stovetop Repair Stories From Mount Horeb Homes
Every burner on our gas range kept clicking after I mopped up a pot that boiled over. I called the number and got connected with a tech the same day. He found the shorted burner switch, replaced it, and showed me how to clean around the burners without soaking them.
The big coil burner on my electric stove quit. The tech moved the coil to another spot, saw it worked, and pulled the receptacle. The terminals were scorched black. New receptacle, quick test, done, and he gave me the price before he started.
We moved into a place with propane and the flames were tall and yellow. The pro explained the range had never been converted, swapped the orifices and adjusted the regulator. Blue flames now and no more soot on my pans.
A tenant cracked the glass cooktop in one of my units. The tech confirmed the elements were fine, quoted the new top over the phone, and came back to install it when it arrived. He also replaced a hot-surface light that had been out for months.
Stove Repair FAQs for Mount Horeb Households
Burner giving you trouble right now?
Describe the cooktop and the problem to dispatch and get connected with an independent stove pro in Mount Horeb.
Call +1-855-394-3377What should I do if I smell gas near my stove?
Leave the home immediately, do not turn on lights, burners or anything electrical, and call the gas utility or emergency line once you are outside. Once it is safe, the dispatch line can connect you with an independent pro to repair the source and leak test the stove.
Why does my gas burner keep clicking after it lights?
Clicking after the flame is lit usually means the burner switch is wet or shorted, or the burner cap is not seated so the flame is not where the igniter expects it. Let the cooktop dry for a day and reseat the cap. If it still clicks, a tech can test the switch and module.
Why is my gas stove flame yellow instead of blue?
Yellow flames come from a poor air and gas mix, often caused by debris in the burner, a bad air setting, or orifices meant for a different gas. If the home uses propane and the range was never converted, the flame will be tall and sooty, and that needs the correct LP orifices.
Can I keep using a glass cooktop with a crack in it?
It is not safe. Heat cycles can widen the crack, and liquid can reach live parts under the glass. Turn the cooktop off at the breaker and have the top replaced before using it again.
Why does my electric burner only work on high?
A coil or radiant burner that runs full heat on every setting has an infinite switch with stuck or welded contacts. It is a common, modest repair, but if the burner will not shut off, turn it off at the breaker until it is fixed.
Why does my induction cooktop not recognize my pan?
The pan has to be magnetic, and it needs a flat base that covers enough of the zone for the sensor to pick it up. When a known-good pan still triggers an error, the cooktop itself needs a look at the power board, coil wiring and cooling fan.
Stove Repair Calls Covered Across Mount Horeb and Beyond
Stove calls from Mount Horeb and nearby neighborhoods go to independent contractors who work locally, so a dead burner does not mean waiting days for someone from across the region.
From an older coil stove in a rental to a new induction cooktop in a remodel, the approach stays the same: diagnose, quote, repair with your approval, and verify every burner. Zip codes and nearby cities served are listed below.
- Gas cooktops and ranges
- Electric coil stoves
- Glass smoothtops
- Induction cooktops
- LP conversion checks
- Rental property stoves
