Burner clicking but not lighting?
Stove Repair in Myrtle Beach, SC
A stovetop with one dead burner slows dinner down, but a burner that clicks nonstop or a coil that will not shut off needs attention right away. Call +1-855-394-3377 and the dispatch line connects you with an independent stove repair pro in Myrtle Beach who carries igniters, spark modules, infinite switches and receptacles.
- Nonstop clicking, weak or yellow flames, dead coils or a cracked glass top
- You get the price after diagnosis and before any part is replaced
- Gas, electric coil, smoothtop and induction cooktops and ranges
Why Choose Our Specialized Stove Repair in Myrtle Beach, SC
A clicking igniter and a gas valve problem can look similar to a homeowner, but they are very different repairs. So the line sends cooktop calls to independent pros who handle gas, electric and induction tops regularly.
Licensed and insured independent pros
Every call goes to an independent local contractor who carries insurance and holds whatever licensing SC requires. Anyone touching a gas valve or orifice should leak test every connection afterward, and you can ask to see it done.
A clear quote first
You hear the diagnosis and price before work begins, so there is no surprise at the end. On a cracked glass top, you also get the price of the new top so you can weigh it against a new range.
Local dispatch with safety in mind
A burner stuck on high or a gas burner that keeps clicking gets flagged as urgent and routed to the soonest available pro in Myrtle Beach. Same-day slots are common, depending on contractor availability.
Burner and gas tools
Cooktop diagnosis needs a multimeter, a manometer to check gas pressure at the regulator, spare orifices for LP conversion, and a combustible gas detector. That is standard kit for the contractors on this line.
- Smell gas? Leave the house and call the gas utility from outside
- Turn off the breaker if an electric burner will not shut off
- Note which burners fail and whether the others still work
Stovetop Problems Independent Pros Sort Out in Myrtle Beach
Cooktop trouble almost always lives in the burner itself, the switch or valve that feeds it, or the ignition system. These are the most common calls that come through dispatch.
Burner clicks but will not light
A burner that clicks without lighting often has a wet or cracked spark igniter, a burner cap sitting crooked, or ports clogged with boiled-over food. The tech checks the cap seating, clears the ports, inspects the igniter porcelain for cracks, and confirms gas is reaching the burner.
Clicking that never stops
Constant clicking across all burners points to a wet or shorted burner switch at the valve, or a failing spark module. Sometimes it dries out on its own in a day, but a switch that has shorted or a spark module that sticks on needs to be replaced.
Weak, uneven or yellow flames
A healthy natural gas flame is blue with a small, defined inner cone. Tall yellow tips, soot on pans or a lazy, lifting flame means the air and gas mix is off. The pro checks the air shutter where fitted, cleans or sizes the orifice, and confirms the range was properly converted if the home runs on LP gas.
Coil burner not heating or stuck on high
When a coil burner does nothing, swap it with a working burner of the same size. If the coil heats in the other spot, the problem is the receptacle or the infinite switch, not the coil. A scorched terminal block under the burner is a frequent cause, along with a worn infinite switch that no longer cycles. If the burner glows red on every setting, the infinite switch has welded contacts and needs to go.
Radiant elements and cracked glass
A smoothtop zone that will not glow usually has a burned-out radiant element or a failed limiter under the glass. Any crack in the glass means the cooktop should stay off until the top is replaced, since liquid can reach the wiring below. If the hot-surface light stays lit on a cold top, or never lights at all, the pro checks the limiters and the control relays.
Induction zones and cookware errors
If an induction zone blinks and shuts off, first check the cookware with a magnet, since non-magnetic pans are not detected. When the cookware is fine, the tech looks at the power board, the induction coil connections and the cooling fan, which shuts the cooktop down if it overheats. Worn knobs, cracked knob stems and sticky gas valves are quick additions to any cooktop visit.
Burner dead or clicking nonstop? Call for a local cooktop pro.
Have the model number ready, often under the cooktop lip or behind the drawer. The call connects you with an available independent cooktop specialist in Myrtle Beach.
From Dead Burner to Full Flame in Four Steps
Calling the line is the only step on your end.
Call dispatch
Call +1-855-394-3377, say what type of cooktop you have, and describe the problem burner by burner. The dispatcher connects you with an available independent pro.
Rapid mobile arrival
A local independent pro comes with the parts behind most cooktop calls already on the truck.
Expert assessment and quote
The pro tests the igniter, switch, element or board, explains the fault, and quotes the repair before replacing parts.
Repair, test and confirm
Each burner is run through low, medium and high, and gas fittings get a leak check before the tech packs up. Ask about the contractor's own parts and labor warranty.
Stovetop Repair Stories From Myrtle Beach Homes
Every burner on our gas range kept clicking after I mopped up a pot that boiled over. I called the number and got connected with a tech the same day. He found the shorted burner switch, replaced it, and showed me how to clean around the burners without soaking them.
The big coil burner on my electric stove quit. The tech moved the coil to another spot, saw it worked, and pulled the receptacle. The terminals were scorched black. New receptacle, quick test, done, and he gave me the price before he started.
We moved into a place with propane and the flames were tall and yellow. The pro explained the range had never been converted, swapped the orifices and adjusted the regulator. Blue flames now and no more soot on my pans.
A tenant cracked the glass cooktop in one of my units. The tech confirmed the elements were fine, quoted the new top over the phone, and came back to install it when it arrived. He also replaced a hot-surface light that had been out for months.
Stove Repair FAQs for Myrtle Beach Households
Burner giving you trouble right now?
Describe the cooktop and the problem to dispatch and get connected with an independent stove pro in Myrtle Beach.
Call +1-855-394-3377What should I do if I smell gas near my stove?
Leave the home immediately, do not turn on lights, burners or anything electrical, and call the gas utility or emergency line once you are outside. Once it is safe, the dispatch line can connect you with an independent pro to repair the source and leak test the stove.
Why does my gas burner keep clicking after it lights?
Clicking after the flame is lit usually means the burner switch is wet or shorted, or the burner cap is not seated so the flame is not where the igniter expects it. Try drying the area and seating the cap firmly. Persistent clicking calls for a switch or module test.
Why is my gas stove flame yellow instead of blue?
Yellow flames come from a poor air and gas mix, often caused by debris in the burner, a bad air setting, or orifices meant for a different gas. Ranges running on LP without a conversion kit burn yellow and sooty, which a tech corrects by fitting the right orifices and setting the regulator.
Can I keep using a glass cooktop with a crack in it?
It is not safe. Heat cycles can widen the crack, and liquid can reach live parts under the glass. Turn the cooktop off at the breaker and have the top replaced before using it again.
Why does my electric burner only work on high?
When the burner ignores the knob and stays on high, the infinite switch behind that knob has failed. The switch is not an expensive part, though if the burner will not turn off at all, cut power at the breaker until the repair.
Why does my induction cooktop not recognize my pan?
The pan has to be magnetic, and it needs a flat base that covers enough of the zone for the sensor to pick it up. When a known-good pan still triggers an error, the cooktop itself needs a look at the power board, coil wiring and cooling fan.
Where Cooktop Calls Get Routed in Myrtle Beach
Stove calls from Myrtle Beach and nearby neighborhoods go to independent contractors who work locally, so a dead burner does not mean waiting days for someone from across the region.
From an older coil stove in a rental to a new induction cooktop in a remodel, the approach stays the same: diagnose, quote, repair with your approval, and verify every burner. Zip codes and nearby cities served are listed below.
- Gas cooktops and ranges
- Electric coil stoves
- Glass smoothtops
- Induction cooktops
- LP conversion checks
- Rental property stoves
